Phone: (03) 97918811
Email: enquiries@atomik.com.au

Feral 150cc

$1,950.00
  • High Output 150cc Engine (engineered for high torque and maximum engine responsiveness)
  • Air Cooled Engine
  • Neutral and Reverse Indicator
  • Heavy Duty Handlebar
  • Single SPEED Forward (Fully Auto) with Reverse Gear
  • Hydraulic Rear Cross Drilled Disc Brake
  • High Profile All Terrain Off Tyres
  • Handle Bar Engine Kill Switch
  • Performance Header Pipe and Muffler
  • Electric Start
  • 20" Front and 19"Rear Wheels
  • Twin Front Suspension and Rear Single Suspension
  • Improved Frame and Swingarm
  • Rear Tail Light
  • Hand Guards
  • Speed Governor to reduce throttle and maximum speed
  • Brake Lock
  • IN STOCK NOW

More Views

Feral150

Incorporating the legendary GY6 150cc engine, this sports quad with loads of power and single speed gearbox with reverse gives hours and hours of fun. Larger in size than the Feral 110cc and Feral 125cc, this quad is enjoyed by children, young adults. Engineered all through to be light and by providing a low centre of gravity this is quad that provides loads of fun and controllable power. Huge 8-inch tyres and twin headlights give this quad an aggressive look. Its electric start makes it easy to start. and adults alike.

ENGINE

 
Engine Model Genuine Atomik CVT Engine - 150cc
Engine Type 4 Stroke - Single Cylinder
Brand Atomik
Cooling System Air Cooled
Compression 9.5:1
Bore x Stroke 57.4mm x 57.8mm
Maximum Output KW / HP 12HP
Maximum Power / Rotating Speed 6kW / 6500rpm
Gearing 20 Tooth Front / 38 Tooth Rear
Idle Speed 1500rpm
Starting System Electric Start
Clutch Type Heavy Duty Wet Multi Plate
Transmission CVT, F-N-R
Fuel Delivery System PD24J-C Vaccum Carburator
Ignition CDI
Fuel Type Regular Unleaded (92 or higher)
Engine Oil Grade Non Synthetic 10W/40SF - 4 Stroke Engine Oil
Magneto Type Electronic Ignition System
Intake / Exhaust 32mm Race Pipe + Performance Steel Muffler
Final Drive Atomik #428 Chain
Spark Plug Torch A7RTC
   

MATERIAL

 
Frame REINFORCED TUBULAR
Swingarm Steel
Controls Alloy Levers
Triple Clamps Steel
Handlebar High Bend Mini Bar
Handlebar Grips Soft High Grip Rubber
Fuel Filter Plastic
Rim (Front) Silver Steel Rim
Rim (Rear) Silver Steel Rim
Tyre (Front) 20 x 7-10' High Grip All Terrain Tread Pattern Knobby Tyre
Tyre (Rear) 19 x 10' - 9 High Grip All Terrain Tread Pattern Knobby Tyre
Suspension (Front) 360mm Oil Damper
Suspension (Rear) 350mm Oil Damper
Brakes (Front) Drum Brakes
Brakes (Rear) Hydraulic Disc Brakes
   

CAPACITY

 
Maximum Speed 80km/h
Maximum Load 100kgs
Fuel Tank Capacity 9L
Optimal Engine Oil Level 800mL
Recommended Tyre Pressure 10psi
   

DIMENSIONS

 
Seat Height 790mm
Ground Clearance / Wheel Base 130mm / 1110mm
G.W. / N.W. 170kgs / 143kgs
Product Size 1625    x 1060 x 1065 mm
Package Size 1460 x 880 x 860 mm


 IMPORTANT INFORMATION YOU MAY NEED TO KNOW

This product comes 80% assembled.

All that is required is to put on the wheels, foot rest, handlebar, brake pads, battery, wiring rear shocks and etc. (Battery Charger Not Included)
Please check that all nuts, bolts and spokes are tightened before riding. Check the oil levels. 

The bikes use unleaded petrol. To run-in the engine, please do not over-rev the engine for the first 3 tanks of petrol.

!!!WARNING!!!

In the Interest of safety it is highly recommended that you have this bike assembled by a qualified motorbike mechanic as there may be some internal adjustment required to be adjusted such as carby requires tuning and valve clearance to be check and many other mechanical services & predelivery check is require before using your item. Please read all relevant information enclosed before using your item....! Any item that is NOT assembled or PD checked by Atomik or by our authorised dealer will not receive any extended warranty on the item and if any part claiming for warranty customers will be required to provide Atomik with a supporting documentation to support the claim. All parts are to be sent back to Atomik for assessment by our QC team if requested by Atomik. Otherwise your claim will not be accepted.

*All items are sold in a crate.
Some items are assembled at 90% and some are only at 70% assembled.
You will require a full equipped workshop for assembly.
Atomik highly recommend that you use a qualified mechanic to assemble all items.

To view the ITEM/INSPECTION PROCEDURE please click on the link below;-

Click here link ---> http://www.atomik.com.au/unboxing-and-assembling-your-new-bike

*** Item Price Does Not Include Postage & Assembly Fees. When ordering directly through a local dealer, please contact them directly for a quote on postage & assembly fees ***

We also offer optional transit insurance for  this item of $25 per item for shpping customers. And optional assembly available for $250 per item, this option is only available for pick up customers only.