Phone: (03) 97918811
Email: enquiries@atomik.com.au

Feral 110cc

$949.00
  • High Output 110cc ATOMIK Engine
  • Air Cooled Engine
  • Twin Head Light
  • Heavy Duty Handlebar
  • Fully Automatic
  • Hydraulic Rear Cross Drilled Disc Brake
  • High Profile All Terrain Off Road Tyres
  • Handle Bar Engine Kill Switch
  • Twin Performance Muffler
  • Easy Electric Start
  • 7" Front and Rear Wheels
  • Twin Front Suspension and Rear Single Suspension
  • Improved Frame and Swingarm
  • Rear Tail Light
  • Larger size than other 110cc quads on the market
  • Speed Governor to reduce throttle and maximum speed
  • Brake Lock
  • PRE ORDER - 03 9791 8811 (COMING SOON)

More Views

 

Feral 110cc

Its not just two wheels that equals fun, The Atomik Feral 110cc Quad provides loads of it. This compact atv, with an Atomik 110cc 4 stroke engine also comes with a  fully auto gear box allowing the little ones enjoy all the fun. Engineered all through to be light and by providing a low centre of gravity this is quad that provides loads of fun and controllable power.  Twin mufflers, huge 7-inch tyres and twin headlights give this quad an aggressive look. Its electric start makes it easy to start. Larger than other 110cc atvs on the market, this is the quad that’s won numerous races in Australia in Junior Division ATVs. 

Looking for a different ATV? Check out our entire range here

Specifications

ENGINE

 
Engine Model Genuine Atomik 110cc Engine
Engine Type 4 Stroke - Single Cylinder
Brand Atomik
Cooling System Air Cooled
Compression 9.0:1
Bore x Stroke 52.4mm x 49.5mm
Maximum Output KW / HP 8HP
Maximum Power / Rotating Speed 6kW / 7500rpm
Gearing 14 Tooth Front / 37 Tooth Rear
Idle Speed 1500rpm
Starting System Electric Start
Clutch Type Heavy Duty Wet Multi Plate
Transmission Fully Automatic (Forward only)
Fuel Delivery System Carburetor
Ignition CDI
Fuel Type Regular Unleaded (92 or higher)
Engine Oil Grade Non Synthetic 10W/40SF - 4 Stroke Engine Oil
Magneto Type Electronic Ignition System
Intake / Exhaust Twin Race Pipe + Twin Performance Steel Muffler
Final Drive Atomik #420 Chain
Spark Plug Torch A7RTC
   

MATERIAL

 
Frame REINFORCED TUBULAR
Swingarm Steel
Controls Alloy Levers
Triple Clamps Steel
Handlebar High Bend Bar
Handlebar Grips Soft High Grip Rubber
Fuel Filter Plastic
Rim (Front) Black Steel Rim
Rim (Rear) Black Steel Rim
Tyre (Front) 16 x 8.00 - 7 High Grip All Terrain Tread Pattern Knobby Tyre
Tyre (Rear) 16 x 8.00 - 7 High Grip All Terrain Tread Pattern Knobby Tyre
Suspension (Front) 260mm Twin Shock
Suspension (Rear) 250mm Monoshock
Brakes (Front) Drum Brakes
Brakes (Rear) Hydraulic Brake with Single Piston Caliper - Ventilated Round Disc Rotor
   

CAPACITY

 
Maximum Speed 65km/h
Maximum Load 80kgs
Fuel Tank Capacity 2.5L
Optimal Engine Oil Level 800mL
Recommended Tyre Pressure 10psi
   

DIMENSIONS

 
Seat Height 650mm
Ground Clearance / Wheel Base 120mm / 820mm
G.W. / N.W. 94kgs / 83kgs
Product Size 1340 x 890 x 870 mm
Package Size 1270 x 770 x 660 mm


 IMPORTANT INFORMATION YOU MAY NEED TO KNOW

This product comes 90% assembled.

All that is required is to put on the wheels, foot rest, handlebar, brake pads, battery, wiring rear shocks and etc. (Battery Charger Not Included)
Please check that all nuts, bolts and spokes are tightened before riding. Check the oil levels. 

The bikes use unleaded petrol. To run-in the engine, please do not over-rev the engine for the first 3 tanks of petrol.

!!!WARNING!!!

In the Interest of safety it is highly recommended that you have this bike assembled by a qualified motorbike mechanic as there may be some internal adjustment required to be adjusted such as carby requires tuning and valve clearance to be check and many other mechanical services & predelivery check is require before using your item. Please read all relevant information enclosed before using your item....! Any item that is NOT assembled or PD checked by Atomik or by our authorised dealer will not receive any extended warranty on the item and if any part claiming for warranty customers will be required to provide Atomik with a supporting documentation to support the claim. All parts are to be sent back to Atomik for assessment by our QC team if requested by Atomik. Otherwise your claim will not be accepted.

*All items are sold in a crate.
Some items are assembled at 90% and some are only at 70% assembled.
You will require a full equipped workshop for assembly.
Atomik highly recommend that you use a qualified mechanic to assemble all items.

To view the ITEM/INSPECTION PROCEDURE please click on the link below;-

Click here link ---> http://www.atomik.com.au/unboxing-and-assembling-your-new-bike

*** Item Price Does Not Include Postage & Assembly Fees. When ordering directly through a local dealer, please contact them directly for a quote on postage & assembly fees ***

We also offer optional transit insurance for  this item of $25 per item for shpping customers. And optional assembly available for $150 per item, this option is only available for pick up customers only.