Phone: (03) 97918811
Email: enquiries@atomik.com.au

Atomik Feral 250cc

$2,290.00
  • Overhead Cam Atomik 250cc Engine (engineered for high torque and maximum engine responsiveness)
  • Water Cooled Engine
  • Digital Dash
  • Tapered Alloy Handlebar
  • Four SPEED Manual with Reverse Gear
  • Hydraulic Rear Cross Drilled Disc Brake
  • High Profile All Terrain Off Tyres
  • Handle Bar Engine Kill Switch
  • Performance Header Pipe and Muffler
  • Electric Start
  • 10" Front and Rear Wheels
  • Twin Front Suspension and Rear Single Suspension
  • Improved Frame and Swingarm
  • Rear Tail Light
  • Radiator Thermo Fan
  • Neutral and Reverse Indicator On Dash
  • Brake Lock
  • Figure 8'S, Doughnuts and Monos are not a problem for this High Output ATV!!
  • PRE ORDER - 03 9791 8811 (COMING SOON ~ April 2017)

More Views

Feral250

There comes a time when one wants the ultimate 250cc atv. The Atomik Feral 250cc quad is frame is engineered to be light but using high quality steels and alloys, provides a strength not seen in other 250cc quads on the market. Its manual gear box allows the rider to control and manipulate its power.

The Atomik Feral 250cc, uses a powerful watercooled overhead cam engine. Overhead cam (OHC) valvetrain configurations place the engine camshaft within the cylinder heads, above the combustion chambers, and drive the valves or lifters in a more direct manner compared to pushrods. Performance advantage is gained as a result of the better optimized port configurations made possible with overhead camshaft designs.

From its tapered alloy bars, digital speedo, this performance 250cc quad is packed with features and offers the best value on the market. Huge 10-inch tyres and twin headlights give this quad an aggressive look. From low end power to top end speed this quad blows away the competition.

ENGINE

 
Engine Model Genuine Atomik Engine - 250cc
Engine Type 4 Stroke - Single Cylinder
Brand Atomik
Cooling System Water Cooled
Compression 9.25:1
Bore x Stroke 65.5mm x 66.2mm
Maximum Output KW / HP 21HP
Maximum Power / Rotating Speed 14kW / 7000rpm
Gearing 15 Tooth Front / 38 Tooth Rear
Idle Speed 1500rpm
Starting System Electric Start
Clutch Type Heavy Duty Wet Multi Plate
Transmission 4 SPEED Manual with Reverse - R1N234 - START IN ANY GEAR
Fuel Delivery System 30mm JINKE Carburetor
Ignition CDI
Fuel Type Regular Unleaded (92 or higher)
Engine Oil Grade Non Synthetic 10W/40SF - 4 Stroke Engine Oil
Magneto Type Electronic Ignition System
Intake / Exhaust 32mm Race Pipe + Sport Tuned Stainless Steel Muffler
Final Drive Atomik #428 Chain
Spark Plug LG D8TC
   

MATERIAL

 
Frame REINFORCED TUBULAR
Swingarm Steel
Controls Alloy Levers
Triple Clamps Steel
Handlebar Alloy Low Bend Fat Tapered Bar
Handlebar Grips Soft High Grip Rubber
Fuel Filter Plastic
Rim (Front) Silver Steel Rim
Rim (Rear) Silver Steel Rim
Tyre (Front) 20 x 7.00 - 10 High Grip All Terrain Tread Pattern Knobby Tyre
Tyre (Rear) 19 x 10.00 - 9 High Grip All Terrain Tread Pattern Knobby Tyre
Suspension (Front) 1000 lbs 390mm Twin Shock with Reservoir
Suspension (Rear) 1000 lbs 320mm Monoshock
Brakes (Front) Hydraulic Brakes with Single Piston Caliper - Ventilated Round Disc Rotor
Brakes (Rear) Hydraulic Brake with Single Piston Caliper - Ventilated Round Disc Rotor
   

CAPACITY

 
Maximum Speed 85km/h
Maximum Load 140kgs
Fuel Tank Capacity 9L
Optimal Engine Oil Level 1200mL
Recommended Tyre Pressure 10psi
   

DIMENSIONS

 
Seat Height 790mm
Ground Clearance / Wheel Base 135mm / 1090mm
G.W. / N.W. 177kgs / 149kgs
Product Size 1625    x 1060 x 1065 mm
Package Size 1460 x 880 x 860 mm


 IMPORTANT INFORMATION YOU MAY NEED TO KNOW

This product comes 80% assembled.

All that is required is to put on the wheels, foot rest, handlebar, brake pads, battery, wiring rear shocks and etc. (Battery Charger Not Included)
Please check that all nuts, bolts and spokes are tightened before riding. Check the oil levels. 

The bikes use unleaded petrol. To run-in the engine, please do not over-rev the engine for the first 3 tanks of petrol.

!!!WARNING!!!

In the Interest of safety it is highly recommended that you have this bike assembled by a qualified motorbike mechanic as there may be some internal adjustment required to be adjusted such as carby requires tuning and valve clearance to be check and many other mechanical services & predelivery check is require before using your item. Please read all relevant information enclosed before using your item....! Any item that is NOT assembled or PD checked by Atomik or by our authorised dealer will not receive any extended warranty on the item and if any part claiming for warranty customers will be required to provide Atomik with a supporting documentation to support the claim. All parts are to be sent back to Atomik for assessment by our QC team if requested by Atomik. Otherwise your claim will not be accepted.

*All items are sold in a crate.
Some items are assembled at 90% and some are only at 70% assembled.
You will require a full equipped workshop for assembly.
Atomik highly recommend that you use a qualified mechanic to assemble all items.

To view the ITEM/INSPECTION PROCEDURE please click on the link below;-

Click here link ---> http://www.atomik.com.au/unboxing-and-assembling-your-new-bike

*** Item Price Does Not Include Postage & Assembly Fees. When ordering directly through a local dealer, please contact them directly for a quote on postage & assembly fees ***

We also offer optional transit insurance for  this item of $25 per item for shpping customers. And optional assembly available for $250 per item, this option is only available for pick up customers only.